7005 Aluminum thru axle dropouts

Description

7005 Aluminum thru axle Dropouts

Precision CNC machined

For 12mm thru axle hub (road/cross/gravel/MTB) 142/148/150mm rear spacing

Material: 7020 Aluminum (identical to 7005)

Diameter: 38.1mm (1-1/2in) diameter for easy mitering

Flange Width: 26mm (1.040in)

Thickness: 7mm (.276in)

Flange thickness: 2mm for easy welding

TIG Weldable with ER5356, ER5183 welding rod.

Heat treatable as per the 7005 aluminum protocol

Sold as one pair of dropouts and two(2x) M4x12mm torx head screws

Material source: Germany (Certificate avaialable on request)

Weight: 61g (no hanger)

Two M4x12mm Torx screws included (no stripped hex heads anymore!)
Hanger NOT INCLUDED (Hanger to suit your application (direct mount, road, MTB, etc.) is avalable from www.paragonmachineworks.com)

NOTE: The left (non-drive side dropout) has a sandblasted finish for a more uniform look (to hide machining marks) and it does not make welding/fabrication etc. any different. Just scuff the surface with some fine sandpaper until shiny metal shows up and TIG weld as usual.